Firmware Menu; Boot:fpga:high Field; Upgrade Field; Download Menu - Motorola DSR-4530 Operator's Manual

3

Firmware Menu

Boot:FPGA:High Field

Read-only

Upgrade Field

Read-only

Download Menu

32
The Firmware menu displays the DSR-4530's firmware release information, which
is equivalent to the product version number. This menu cannot be changed, but
since the firmware is periodically updated, this menu confirms that the update was
successful. This menu is used most commonly in troubleshooting.
Press the 56 buttons until the Firmware menu appears (shown below).
FIRMWARE
E
The Boot:FPGA:High field displays the current version of boot code, the Field-
Programmable Gate Array (FPGA) code, and the high (memory) code. The boot
and FPGA codes are loaded at the factory. The high code may be upgraded to later
versions by a download that is delivered over the satellite signal (from either the
L-band or ASI input). The version information for all the codes is represented by a
six-digit hexadecimal number. This field is non-editable.
The Upgrade field displays the version of the upgrade code that is available. This
field displays 000000 when no upgrade code is available. Available upgrades are
installed the next time the DSR-4530 is powered on. This field is non-editable.
The Download menu allows the user to monitor the status of the current code
download. This menu is used most commonly in troubleshooting.
Press the 56 buttons until the DOWNLOAD menu appears (shown below).
DOWNLOAD
E 0000:00 00
• During a foreground code download the unit mutes video and audio and ignores
user commands. The unit presents this menu during a foreground code
download.
• During a background code download the unit collects the upgrade code in the
background while concurrently decoding video and audio services. The user
can select this menu anytime before, during, and after a background code
download.
Boot:FPGA:High
XXXXXX:XXXXXX:XXXXXX
File Current Rcvd Total
00 of 00 0000
Upgrade
000000
0000 0000