Core Menu - Motorola DSR-4530 Operator's Manual

Core Menu

Contrast Field
Not
TSID Field
Supported
DSR-4530
Press any arrow button ( 3456 ) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed. The following message displays
Power Cycle reset in progress. . .
Press E to continue or
The Core menu allows the user to change the front panel LCD contrast.
Press the 56 buttons until the Core menu appears (shown below).
Core
E
To adjust the LCD contrast, press the 4 button until the cursor is at the Contrast
label, and press the ENTER button to move into the field. Use the arrow buttons
( 3456 ) to select a value between 1 and 30, with 1 representing the least
contrast and 30 the most. Adjust the contrast so that the LCD panel can be read
clearly. Press the ENTER button to confirm the selection.
Note: The Transport Stream ID (TSID) field is not supported at this time.
The TSID field (range 0000 to FFFF) is a hexadecimal number to identify the
Transport Stream. The TSID value applies when the symbol rate is 4.88 Msps or
less, then the unit uses this value during manual tune to acquire the correct signal.
to stop
Contrast TSID(hex)
18
Default: 18
Default: 0000
Operating the DSR-4530
.
29