Text Lang Menu; Emm Id Menu - Motorola DSR-4530 Operator's Manual

Text Lang Menu

This Text Language menu has two fields that allow the user to modify and view the
status of the language for the subtitle display. Press the 56 buttons until the Text
Lang (Text Language) menu appears (shown below).
Display Field
Refer to the Display field description under the Audio1 Language menu on page 38
for the All, Available, and Status options. This field also has a fourth option, Off,
which disables subtitles.

EMM ID Menu

The Entitlement Management Message (EMM) ID menu allows for additional
flexibility in access control. It allows the user to enter a new EMM provider ID
number, when required.
Caution: If the EMM provider ID is not known, use the default setting of zero.
Press the 56 buttons until the EMM ID menu appears (shown below).
ID Number Field
The ID Number field (range 0000 to FFFF) allows the user to change the EMM ID
number, which is represented in the hexadecimal format.
Press the 4 button until the cursor is at the ID Number label, and press the ENTER
button to move into the field. Use the 34 buttons to select the digit to change and
then, while the cursor is on that digit, press the 56 buttons to display the desired
value. Repeat this process for each applicable digit.
Press the ENTER button to confirm the selection.
DSR-4530
TEXT LANG Display
E All
Default: Off
EMM ID ID Number(Hex)
E 0000
Default: 0000
Operating the DSR-4530
41