Motorola DSR-4530 Operator's Manual page 29

AudioMix Field
Note: If the audio input mode is stereo and you are connecting to a mono modulator,
you must set this field to Mono.
This field allows selection of the audio processing options. Press the 4 button until
the cursor is at the AudioMix label, and press the ENTER button to move into the
field. Press the 56 buttons to display the options:
•
•
•
•
CAUTION MESSAGE: If Dual Mono is selected, a caution screen appears.
The warning screen denotes possible conflicts between this menu and the channel
selection menus that specify audio language and appears if the user had previously
used the Language menu (channel selection group, see "Aud1Lang, Aud2Lang
Menus" (described on page 38)) to select a single language for Mono or Stereo output
and then changed this setting to Dual Mono output. See the channel selection group,
described in the "Aud1Lang, Aud2Lang Menus" (described on page 38) for details on
how the two fields interact.
By pressing the ENTER button (ignoring the caution), the DSR-4530 changes to Dual
Mono, and uses the language previously selected for Mono (or Stereo) for both left
and right channels, refer to "Aud1Lang, Aud2Lang Menus" (described on page 38).
Compress Field
This field allows control of the degree of audio level compression. Press the 4 button
until the cursor is at the Compress label, and press the ENTER button to move into the
field. Press the 56 buttons to display the options:
•
•
•
Press the ENTER button to confirm the selection.
DSR-4530
Stereo: Stereo output on both left and right channels.
Surround: Enhanced stereo, with boosted bass, on both left and right channels.
Mono: Mono output on left channel.
Dual Mono: Mono output on both left and right channels.
CAUTION: Check audio language selection
Press E to continue or
Heavy: Reduces the louder audio signals and boosts the softer signals using
tighter compression thresholds in order to eliminate dramatic fluctuations in the
audio signal level and suppress dynamic range of the audio signal.
Moderate: Provides some reduction and amplification of the audio signal, but the
thresholds are wider apart, providing moderate dynamic range of the audio signal.
Off: Compression is not used and provides full dynamic range of the audio signal.
Default: Stereo
to stop
Default: Moderate
Operating the DSR-4530
23