Audio Test Signal Menu - Motorola DSR-4530 Operator's Manual

Commercial integrated receiver/ decoder
Table of Contents

Advertisement

Audio Test Signal Menu

This menu allows the user to select an audio test signal for each of the two audio
outputs, Audio1 and Audio2. Press the 56 buttons until the Audio Test Signal menu
appears (shown below).
L1/R1 Field
Caution: Audio output to the customers may be interrupted and test signals
override any active service component.
This field allows the user to enable the Audio1 test signal. Press the 4 button until
the cursor is at the L1/R1 label. Press the ENTER button to enter the field. Use the
56 buttons to display the three test options:
To terminate an audio test signal, use the 56 buttons to select Off and press the
ENTER button, or exit the L1/R1 field.
L2/R2 Field
Caution: Audio output to the customers may be interrupted and test signals
override any active service component.
This field allows the user to enable the Audio 2 test signal. Press the 4 button until
the cursor is at the L2/R2 label. Press the ENTER button to enter the field. Use the
56 buttons to display the three test options:
To terminate an audio test signal, use the 56 buttons to select Off and press the
ENTER button, or exit the L2/R2 field.
DSR-4530
AUDIO TEST SIGNAL
E
Off
1000 Hz at +16 dBm
4040 Hz and 3960 Hz at +4 dBm
Off
1000 Hz at +16 dBm
4040 Hz and 3960 Hz at +4 dBm
L1/R1
L2/R2
Off
Off
Default: Off
Default: Off
Operating the DSR-4530
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents