Port Config Menu; Port Test Field; Audio1 And Audio2 Menus - Motorola DSR-4530 Operator's Manual

3

Port Config Menu

Not

Port Test Field

Supported
Port1 Power Field

Audio1 and Audio2 Menus

DialNorm Field
22
Use this menu to configure LNB power for port 1.
PORT CONFIG
E
This function is currently not supported at this time.
Use this field to direct power to the external Low-Noise Block (LNB) converter.
When the On option is selected, the DSR-4530 supplies +20 VDC on the port 1
antenna input connector.
Press the 4 button until the cursor is at the LNB Power label, and press the
ENTER button to move into the field. Press the 56 buttons to display the two
options, Off and On.
These menus have three fields that allow the user to customize the audio output
based on options provided by the digital audio compression. Press the 56 buttons
until the Audio1 or Audio2 menu appears (shown below).
AUDIO1
E
AUDIO2
E
The DialNorm field allows the user to normalize speech levels to a constant level
over all channels—raising or lowering the volume of the dialogue to a level that is
appropriate for the background sound track.
Press the 4 button until the cursor is at the DialNorm label. Press the ENTER
button to move into the field. There are two options, On and Off. Press the 56
buttons to change the setting. Press ENTER to confirm selection.
Port Test Port 1 Power
Off
Default: Off
DialNorm AudioMix
Off Stereo
DialNorm AudioMix
Off Stereo
Default: On
Compress
Off
Compress
Off