Pre-Ride Inspection
Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor wear and deterioration before they become a problem. Correct any
problem that you discover to reduce the risk of a breakdown or crash. See
an authorized Can-Am dealer if necessary.
Before using this vehicle, the operator and/or an adult should always perform the
following pre-ride inspection check list.
Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
Fluids
Leaks
Steering
Throttle lever
Parking brake
Tires
Wheels
Radiator
Drive chain and
sprockets
________
WARNING
INSPECTION TO PERFORM
Check fuel and engine oil.
Check brake system for fluid leaks (DS 90 X).
Check for any leaks under vehicle.
Check if steering operates freely by completely turning it
from side to side.
Activate throttle lever several times to ensure it operates
freely. It must return to idle position when released.
Ensure the speed limiter screw is properly adjusted
according to rider capability.
Apply parking brake and ensure it operates properly.
Check tire pressure and condition.
Check wheels for damage.
Check cleanliness of the radiator.
Inspect sprockets for wear or damages.
Check drive chain, slider and drive chain tensioner for
proper adjustment and lubrication (as applicable).
SAFETY INFORMATION
RIDING THE VEHICLE
________
✔
39