MAINTENANCE PROCEDURES
vmo2008-008-038_a
REMOVE RUBBER PROTECTOR
1. Rubber protector
vmo2008-008-039_a
PUSH AND TURN BULB HOLDER
COUNTERCLOCKWISE
1. Bulb holder
______________
96
vmo2008-008-040_a
PULL ON BULB TO REMOVE THEN REPLACE
BULB
1. Bulb
Drive Chain and Sprockets
Drive Chain and Sprocket
Inspection
NOTICE
Replace
sprockets together to prevent rapid
wear of these components.
NOTICE
Never operate this vehi-
cle with the drive chain too loose or
too tight as severe damage to the
drive components can occur.
Drive Chain
Inspect the chain for damaged links
and rollers.
Replace chain if any damage is found.
Check the free-play of drive chain and
adjust if necessary. Refer to
CHAIN ADJUSTMENT
Roller
Inspect the drive chain roller around
swing arm pivot member for excessive
wear and damage. Replace if neces-
sary.
chain
and
DRIVE
.