Adjustment/Maintenance - Kyocera ECOSYS M6026cidn Operation Manual

Setup, Registration, and User Management > System Menu
Item
Error Clear Timer
Unusable Time*2
*1 This is displayed when the optional Card Authentication Kit is installed.
*2 Only on products with the fax function installed.

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
Item
Density Adjustment
Copy
Send/Box
Background Density Adj.
Copy (Auto)
Send/Box (Auto)
Auto Color Correction
Correcting Black Line
Display Brightness
Color Registration
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (every five seconds)
NOTE: If you select [Off] for [Auto Error Clear], the time display does not appear.
For details, refer to the FAX Operation Guide.
Adjust density.
Adjust copy density. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust scan density when sending or storing the data in Document Box. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density adjustment.
Darkens or lightens overall background density adjustment during copying. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density when sending images or storing them in the
Document Box. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 1 (Color), 2, 3, 4, 5 (B & W)
Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value
Off: No correction performed.
On (Low): Correction performed. The reproduction of fine lines on the original may become
lighter than when using [Off].
On (High): Select this item if a streak remains after using [On (Low)]. The reproduction of fine
lines on the original may become lighter than when using On (Low).
Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4 (Lighter)
When first installing the machine or moving it to a new location, color drift during printing may
occur. Use this function to correct the color position of each of cyan, magenta and yellow to
resolve color drift.
For more information, refer to the Color Registration Procedure below.
9-28
Description
Description