Related Manuals for Kyocera ECOSYS M6026
Summary of Contents for Kyocera ECOSYS M6026
- Page 1 Projekt CAMPUS dB Kyocera ECOSYS M6026/M6526cidn Lufthansa Systems Infratec GmbH Object: Technical Documentation Author: Dirk Czichon Signed off by: Manuel Siefker Version: 1.0 Valid from: 05.07.2014...
- Page 2 Projekt CAMPUS dB Technical Documentation Kyocera ECOSYS M6026/M6526cidn FRA AI/M-D Table of Contents Introduction ........................3 Requirements ......................3 Interfaces ........................ 3 Putting into Operation ..................... 4 Set up the network connection using a suitable network cable........ 4 Set up some printer settings ..................4 Set up the network settings ..................
- Page 3 1 Introduction This document describes the putting into operation and minimum configuration of the printer Kyocera ECOSYS M6026cidn and M6526cidn. This color printer can be used in a network and has a Duplex Print option. Additionaly this multi-function-printer can be used for direct paper copies ( even without cable The function Scan2mail is possible, but not part of this document.
-
Page 4: Putting Into Operation
Projekt CAMPUS dB Technical Documentation Kyocera ECOSYS M6026/M6526cidn FRA AI/M-D 2 Putting into Operation Set up the printer according to the instructions supplied by the manufacturer and put it into “ECOSYS_M6026cidn_M6526cidn_OG_ENG.pdf “ provided by Kyocera. operation. Some excerpts are added in the appendix of this document. - Page 5 Projekt CAMPUS dB Technical Documentation Kyocera ECOSYS M6026/M6526cidn FRA AI/M-D Scroll and select “IP-Address”, xx.xxx.xxx.xxx set according to order Scroll and select “Subnet Mask”, 255.255.xxx.xxx set according to order Scroll and select “Default Gateway”, xx.xxx.xxx.x set according to order Leave this level “ < ”...
- Page 6 Projekt CAMPUS dB Technical Documentation Kyocera ECOSYS M6026/M6526cidn FRA AI/M-D 2.4 Restart the printer Scroll and select “Restart” Press “Yes” 2.5 Handover to ServiceDesk or RolloutControlCenter Call the ServiceDesk or RolloutControlCenter and handover for testing the reachablitlity of the printer and final configuration.