Energy Saver Function; Low Power Mode - Kyocera ECOSYS M6026cidn Operation Manual

Preparation before Use > Energy Saver function

Energy Saver function

If a certain period of time elapses after the machine is last used, the machine automatically enters Low Power Mode to
reduce power consumption. If a further period of time elapses without the machine being used, the machine
automatically enters sleep mode, which minimizes power consumption.

Low Power Mode

If the machine is not operated for a certain period of time, the Energy Saver indicator will light
up and the touch panel will become dark to reduce power consumption. This status is referred
to as Low Power Mode. "Low power." will be displayed on the touch panel.
The default preset time is 1 minute.
For more information about configuring settings, refer to
If print data is received during Low Power Mode, the machine automatically wakes up and
starts printing. Also when fax data arrives while the machine is in Low Power Mode when
using the optional fax, the machine automatically wakes up and starts printing.
To resume, perform one of the following actions.
• Press any key on the operation panel.
• Open the document processor.
• Place originals in the document processor.
The machine will be ready to operate within 11 seconds.
Note that ambient environmental conditions, such as ventilation, may cause the machine to
respond more slowly.
NOTE
When a preset time of Low Power Timer and Sleep Timer is same, Sleep Mode overrides

Low Power Mode.

2-27
Low Power Timer on page 9-27
.