Kyocera ECOSYS M6026cidn Operation Manual page 278

Setup, Registration, and User Management > System Menu
Item
Protocol Detail
NetBEUI
LPD
SMTP (E-mail TX)
POP3 (E-mail RX)
FTP Client
(Transmission)
FTP Server (Reception)
SMB Client
(Transmission)
LDAP
SNMP
SNMPv3
HTTP
HTTPS
IPP
IPP over SSL
RAW Port
ThinPrint
ThinPrintOverSSL
* After changing the setting, restart the system or turn the machine OFF and then ON.
The table below lists the network related function settings. The network related functions are
available when [TCP/IP] is [On].
Selects whether or not to receive documents using NetBEUI.*
Value: Off, On
Select whether or not to receive documents using LPD as the network protocol.*
Value: Off, On
Select whether or not to send e-mail using SMTP.
Value: Off, On
Select whether or not to receive e-mail using POP3.
Value: Off, On
Select whether or not to send documents using FTP. When selecting [On], set the FTP Port
Number. Use the FTP default port 21.
Value: Off, On, Port: 1 - 65535
Select whether or not to receive documents using FTP.*
Value: Off, On
Select whether or not to send documents using SMB. When selecting [On], set the SMB default
Port Number. Use the SMB default port 139. For Windows Vista, use 445.
Value: Off, On, Port: 1 - 65535
Select whether or not to use LDAP.
Value: Off, On
Select whether or not to communicate using SNMP.*
Value: Off, On
Select whether or not to communicate using SNMPv3.*
Value: Off, On
Select whether or not to communicate using HTTP.*
Value: Off, On
Select whether or not to communicate using HTTPS. SSL must be set to [On] in SSL on page
9-22.*
Value: Off, On
Select whether or not to communicate using IPP. When selecting [On], set the IPP default Port
Number. Use the IPP default port 631.*
Value: Off, On, Port: 1 - 32767
Select whether or not to use IPP over SSL. When selecting [On], set the IPP over SSL default
Port Number. Use the IPP over SSL default port 443. SSL must be set to [On] in SSL on page
9-22.*
Value: Off, On, Port:1 - 32767
Select whether or not to communicate using Raw Port.*
Value: Off, On
Select whether or not to use ThinPrint. When selecting [On], set the default ThinPrint Port
Number. Use the ThinPrint default port 4000.*
Value: Off, On, Port: 1 - 32767
NOTE: This function is displayed only when the optional ThinPrint Option is activated.
Select whether or not to use ThinPrintOverSSL. SSL must be set to [On] in SSL on page 9-22.
Value: Off, On
NOTE: When selecting [On], the certificates must be installed. For details, refer to the
Command Center RX User Guide.
9-21
Description