Quick Copy/Proof And Hold - Kyocera ECOSYS M6026cidn Operation Manual

Printing > Printing Data Saved on the Printer

Quick Copy/Proof and Hold

Quick Copy/Proof and Hold stores the print data which is printed by using the printer driver as a Quick Copy/Proof and
Hold Print job.
Refer to the Printer Driver Operation Guide on how to print a job as Quick Copy/Proof and Hold Print job using the
printer driver.
NOTE
The optional SSD must be installed or RAM disk mode must be enabled.
For details, refer to SSD on page 11-4 and RAM Disk Setting on page 9-26.
Setting the Number of Stored Jobs
To maintain free space on the RAM disk, you can set the maximum number of stored jobs.
1
2
Display the screen.
1
Enter the maximum number of stored jobs.
System Menu/Counter.
Job Box - Quick Copy Job Retention
(0 - 300)
1
Cancel
You can enter any number between 0 and 300.
NOTE
If you enter a value of 0 (zero), you cannot use the Quick Copy/Proof and Hold function.
System Menu/Counter.
System Menu
Send
Document Box
FAX
System Menu/Counter.
Document Box
Favorites/Application
Custom Box
Sub Address Box
Job Box
Polling Box
10:10
job(s)
2
OK
5-8
10:10
2
3/5
3
System Menu/Counter.
Document Box - Job Box
< Back
Quick Copy Job Retention
4
Deletion of Job Retention
< Back
10:10
1/1
10:10
32job(s)
Off
1/1