Damper Pedal; Demo; The Music Stand - Korg Pa50 User Manual

On the Pa50, select the MIDI Setup that best fit your
3.
controllers type (see "Page 4 - MIDI Setup" on
page 126).

DAMPER PEDAL

Connect a Damper (Sustain) pedal to the DAMPER connec-
tor on the back panel. Use a KORG PS1, PS2 or DS1H foot-
switch pedal, or a compatible one. To switch the Damper
polarity, see "Damper Pol. (Damper Polarity)" on page 126

DEMO

Listen to the built-in Demo Songs to appreciate the power of
the Pa50. There are 16 Demo Songs to choose from.
Press the STYLE PLAY and SONG PLAY buttons
1.
together. Their LEDs start blinking.
At this point, if you don't press any other button, all the
Demo Songs will be played back.
Choose a page using the PAGE buttons. There are two
2.
different pages in the Demo mode.
3. Select a Demo Song by pressing the corresponding
VOLUME/VALUE button around the display. The
Demo will automatically start.
4. Stop the Demo by pressing START/STOP.
5. Exit the Demo mode by pressing one of the MODE but-
tons.

THE MUSIC STAND

A music stand comes standard with your Pa50. Fit it into the
two dedicated holes in the back panel.
Start up 11
Damper Pedal