Edit: Quantize; Edit: Transpose; Edit: Velocity - Korg Pa50 User Manual

100 Song operating mode
Page 17 - Edit: Quantize
PAGE 17 - EDIT: QUANTIZE
The quantize function corrects any rhythm error after
recording.
Edit:Quantize
S001.01.000 E001.01.192
Bottom:C-1
After setting the various parameters, press ENTER to execute.
The "Are you sure?" message will appear. Press ENTER to
confirm, EXIT to abort.
Trk (Track)
Use this parameter to select a track.
All All tracks selected.
1...16 Selected track.
Resol (Resolution)
This parameter sets the quantization after recording. For
example, when you select 1/8a, all notes are moved to the
nearest 1/8 division. When you select 1/4, all notes are moved
to the nearest 1/4 division.
No quanti-
zation
1/8
1/4
(1/32)... (1/4)
Grid resolution, in musical values. An "a" after
the value means no swing. A "b...f " after the
value means swing-quantization.
S / E (Start/End)
Use these parameters to set the starting (S) and ending (E)
points of the range to quantize.
If you wish to select a four-measure sequence starting at the
beginning of the Song, the Start will be positioned at
1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the key-
board range to quantize. If you select the same note as the
Bottom and Top parameters, you can select a single percus-
sive instrument in a Drum track.
Note: These parameters are available only when a Drum track
is selected.
Trk:1
Resol:
Top: G9
PAGE 18 - EDIT: TRANSPOSE
Here you can transpose the Song, a track or a part of a track.
Edit:Transpose
S001-01-000 E001-01-192
Bottom:G-1
After setting the various parameters, press ENTER to execute.
The "Are you sure?" message will appear. Press ENTER to
confirm, EXIT to abort.
Trk (Track)
Use this parameter to select a track.
All All tracks selected (apart for Drum tracks).
1...16 Selected track.
Value
Value of the transpose (in semitones).
S / E (Start/End)
Use these parameters to set the starting (S) and ending (E)
points of the range to transpose.
If you wish to select a four-measure sequence starting at the
beginning of the Song, the Start will be positioned at
1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the key-
board range to transpose. If you select the same note as the
Bottom and Top parameters, you can select a single percus-
sive instrument in a Drum track.
PAGE 19 - EDIT: VELOCITY
Here you can change the Velocity value for the notes.
Edit:Velocity
S001-01-000 E001-01-192
Bottom:G-1
After setting the various parameters, press ENTER to execute.
The "Are you sure?" message will appear. Press ENTER to
confirm, EXIT to abort.
Trk (Track)
Use this parameter to select a track.
All All tracks selected.
1...16 Selected track.
Value
Velocity change value.
S / E (Start/End)
Use these parameters to set the starting (S) and ending (E)
points of the range to edit.
Trk:1
Value: +0
Top:C8
Trk:1
Value: +0
Top:C8