Using The Pedals; Damper Pedal Settings For Layer And Split - Korg Ci-9600 Owner's Manual

4. Using the pedals

Damper pedal settings for Layer and Split

1
2
28
To cancel the effect
Press the [CHORUS etc.] switch to make the [CHORUS etc.] indicator turn off.
The Ci-9600/Ci-8600 has three pedals: damper, center (sostenuto), and soft. By using
these pedals you can make your playing more expressive.
Soft pedal
Sostenuto pedal
Damper pedal
Sounds will be sustained as long as you press the pedal, producing a rich, lingering
resonance. The depth to which you press the pedal will affect the degree to which the
damper is applied (half-pedal effect).
Center pedal (Sostenuto pedal)
The center pedal can be used either as a Sostenuto pedal, or for another function such
as the [START/STOP] switch for automatic accompaniment.
If Sostenuto is selected as the function of this pedal, the damper effect will be applied
only to notes that were already being held down when this pedal was pressed, causing
them to be sustained. The damper effect will not apply to notes that are played after
Sostenuto was pressed.
Soft pedal
Notes played while the Soft pedal is pressed will be slightly muted in tone. The depth
to which you press the pedal will affect the degree to which the Soft effect is applied
(half-pedal effect).
You can specify whether the damper pedal effect will apply to one or both sounds
when you use the Layer or Split functions.
Press the [FUNCTION] switch
Access the pedal assign screen
Press the [PAGE ®] switch twice to access the "Func 3/13" page.
Damper pedal