Korg Pa50 User Manual page 202

200 Effects
Mod./P.Shift
039: PitShiftMod.
(Pitch Shift Modulation)
This effect modulates the detuned pitch shift amount using
an LFO, adding a clear spread and width to the sound by pan-
ning the effect sound and dry sound to the left and right.
This is especially effective when the effect sound and dry
sound output from stereo speakers are mixed.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Pitch Shifter
Right
LFO: Tri / Sqr
Pitch Shift [cent]
a
Sets the pitch difference from the input signal
LFO Waveform
b
Selects LFO Waveform
LFO Frequency [Hz]
Sets the LFO speed
Src
c
Selects the modulation source of LFO speed
Amt
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using the
tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base Note
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Depth
Sets the LFO modulation depth for pitch shift amount
Src
e
Selects the modulation source of the depth of modulation
Amt
Sets the modulation amount of the depth of modulation
Pan
f
Sets the panning effect sound and dry sound separately
Wet/Dry
Table , "Sets the balance between the effect and dry sounds," on page 175
,
Src
g
Table , "Selects the modulation source of the effect balance," on page 175
Amt
Table , "Sets the modulation amount of the effect bal-
ance," on page 175
a: Pitch Shift [cent], e: Depth
These parameters set the amount of pitch shift and
amount of modulation by means of the LFO.
Pitch
Original Pitch
f: Pan, g: Wet/Dry
The Pan parameter pans the effect sound and dry sound
to the left and right. With L, the effect sound is panned
left, and the dry sound is panned right. With a Wet/Dry =
Wet setting, the effect and dry sound will be output in a
proportion of 1:1.
Wet / Dry
Pan
Wet / Dry
–100...+100cent
Triangle, Square
0.02...20.00Hz
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Off, On
Fx:009,
MIDI, 40...240
Fx:009
Fx:009
x1...x16
Fx:009
–100...+100
,
Off...Tempo
–100...+100
L, 1:99...99:1, R
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Pitch Shift Mod - Pitch Shift / Depth
LFO Waveform=Triangle
Depth (+value)
Pitch Shift (+ value)
LFO Waveform=Square
Depth (–value)
040: RotarySpeak
(Rotary Speaker)
This effect simulates a rotary speaker, and obtains a more
realistic sound by simulating the rotor in the low range and
the horn in the high range separately. The effect also simu-
lates the stereo microphone settings.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Horn
Rotary Speaker
+
Rotor
Right
D -mod
Mode Switch: Rotate/Stop
D -mod
Speed Switch: Slow/Fast
D -mod
Manual Speed Control
Mode Switch
Switches between speaker rotation and stop
Src
a Selects the modulation source that toggles between rotation and stop
Sw
Selects switching mode of the modulation source that toggles between rota-
tion and stop
Speed Switch
Switches the speaker rotation speed between slow and fast
Src
b Selects the modulation source that toggles between slow and fast
Sw
Selects switching mode of the modulation source that toggles between slow
and fast
Manual Speed Ctrl (Manual Speed Control)
c Selects the modulation source in case the rotation speed is changed
directly
Horn Acceleration
How quickly the horn rotation speed in the high range is switched
d
Horn Ratio
Adjusts the (high-range side) horn rotation speed. Standard value is 1.00.
Selecting "Stop" will stop the rotation
Rotor Acceleration
Determines how quickly the rotor rotation speed in the low range is switched
e
Rotor Ratio
Adjusts the (low-range side) rotor rotation speed. Standard value is 1.00.
Selecting "Stop" will stop the rotation
Horn/Rotor Balance
f
Sets the level balance between the high-range horn and low-range rotor
Mic Distance
Sets the distance between the microphone and rotary speaker
g
Mic Spread
Sets the angle of left and right microphones
Wet/Dry
Table , "Sets the balance between the effect and dry sounds," on page 175
Src
h
Table , "Selects the modulation source of the effect balance," on page 175
Amt
Table , "Sets the modulation amount of the effect bal-
ance," on page 175
a: Sw
This parameter sets how the modulation source switches
between rotation and stop.
When "Sw" = Toggle, the speaker rotates or stops alter-
nately each time you press the pedal or operate the joy-
stick.
Each time the value for the modulation source exceeds 64, the
speaker rotates or stops alternately.
Wet / Dry
Horn/Rotor Mic Distance
Mic Spread
Balance
Speaker Simulation
Wet / Dry
Rotate, Stop
Off...Tempo
Toggle, Moment
Slow, Fast
Off...Tempo
Toggle, Moment
Off...Tempo
,
0...100
Stop, 0.50...2.00
0...100
Stop, 0.50...2.00
Rotor, 1...99, Horn
0...100
0...100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100