136
Disk edit environment
Page 2 - Save
The file/folder
...contains...
type...
Program
The USER Programs
and Drum Kits
Perform (Per-
The Performances
formances)
.GBL file
The Global. All param-
eters marked with
within the Style
Play, Song Play, Song
and Global chapters
are saved in the Glo-
bal.
Saving the whole memory content
You can save the whole content of the memory with a single
operation.
1.
Insert the target disk into the disk drive.
The whole content ("All") of the internal memory is
2.
already selected. Press F2 (Save) to confirm the selec-
tion.
The content of the target disk appears.
3.
Disk:Save
NEW_NAME.SET
LIVE.SET
ETHNICA.SET
FD
SAVE
At this point, you can:
• Create a new ".SET" folder (see "Creating a new ".SET"
folder" on page 138).
• Save onto an existing ".SET" folder.
If you are saving into an existing folder, move the
4.
desired ".SET" folder to the first line of the display, using
the E-H (Scroll) buttons (or the TEMPO/VALUE con-
trols).
5.
Once the target folder is selected, press F2 (Save) to save
the files. The "Are you sure?" message will appear. Press
ENTER to confirm, or EXIT to abort.
Warning: After confirming, all data in the target folder is
deleted.
When the operation is completed (the "Wait" indicator
disappears), the source page comes back in the display,
and you may perform further saving operations.
Saving all data of a specific type
You can save all data of a specific type with a single operation.
1.
Insert the target disk into the disk drive.
2.
The whole content ("All") of the internal memory is
already selected. Press F3 (Open) to open the "All"
...and will create on
disk...
A PROGRAM folder
inside a .SET folder
A PERFORM folder
inside a .SET folder
A GLOBAL folder
inside a .SET folder
|
OPEN
CLOSE
folder. A list of User data types appear (each type is a
separate folder).
Disk:Save
GLOBAL
PERFORM
PROGRAM
FD
SAVE
Use the E-H (Scroll) buttons (or the TEMPO/VALUE
3.
controls) to move the data type you are looking for to
the first line of the display.
Once you have selected the type of data required, press
4.
F2 (Save) to confirm the selection.
The content of the target disk appears.
5.
Disk:Save
NEW_NAME.SET
LIVE.SET
ETHNICA.SET
FD
SAVE
At this point, you can:
• Create a new ".SET" folder (see "Creating a new ".SET"
folder" on page 138).
• Save onto an existing ".SET" folder.
If you are saving into an existing folder, move the
6.
desired ".SET" folder to the first line of the display, using
the E-H (Scroll) buttons (or the TEMPO/VALUE con-
trols).
Once the target folder is selected, press F2 (Save) to save
7.
the files. The "Are you sure?" message will appear. Press
ENTER to confirm, or EXIT to abort.
Warning: After confirming, all data in the target folder is
deleted.
When the operation is completed (the "Wait" indicator
disappears), the source page comes back in the display,
and you may perform further saving operations.
Saving a single bank
You can save a single User bank with a single operation. A
bank corresponds to a button on the control panel of the
instrument (i.e. a button of the STYLE section).
1.
Insert the target disk into the disk drive.
2.
The whole content ("All") of the internal memory is
already selected. Press F3 (Open) to open the "All"
|
|
OPEN
CLOSE
|
OPEN
CLOSE