Aft.t Fil (Aftertouch Filter Setting); Damp. P Pol (Damper Pedal Polarity Setting); Asgn. Sw. Pol (Assignable Pedal Switch Polarity Setting); Data Dump (Transmit A Midi Data Dump) - Korg SGPROX Owner's Manual

Global mode

4. AFT.T FIL (Aftertouch Filter setting)

This setting specifies whether or not the SGproX will transmit keyboard aftertouch data.
With a setting of DIS, aftertouch data will not be transmitted.
Since aftertouch messages are produced when even slight pressure is applied to the keyboard, you should set
this to DIS if you are recording on an external sequencer and do not need to record aftertouch. (This will
conserve sequencer memory.)
Range of settings
Factory setting

5. DAMP. P POL (Damper Pedal polarity setting)

Specify the polarity of the damper (sustain) pedal that is connected to the rear panel Damper jack.
Either closed ( ) or open ( ) type pedals can be used. If you are using a Korg DS-1H damper pedal (sold
separately), set this to "closed" (–).
If notes are not sustained when you press the foot pedal, try reversing the polarity setting. If a pedal is not
connected, we recommend that you set this to "–".
Range of settings
Factory setting

6. ASGN. SW. POL (Assignable Pedal Switch polarity setting)

Specify the polarity of the pedal switch that is connected to the rear panel Assignable Pedal Switch jack.
Either closed ( ) or open ( ) type pedals can be used. If you are using a Korg PS-1 pedal switch (sold
separately), set this to "closed" (–). If a pedal is not connected, we recommend that you set this to "–".
Range of settings
Factory setting

7. DATA DUMP (Transmit a MIDI Data Dump)

A data dump transmits SGproX exclusive data (program or performance settings) to an external MIDI data
dump filer or computer connected to MIDI OUT A.
Data transmission procedure
1) Connect the SGproX's MIDI OUT A to the MIDI IN of an external MIDI device that is able to receive a
MIDI data dump.
2) Set the SGproX's Global MIDI channel to match the channel of the external MIDI device (another SGproX or
a personal computer which is running sound editing software etc.). However, if you are transmitting data to a
MIDI data filer, most receive on all MIDI channels.
3) Select the data that you wish to dump, move the cursor to "OK?" and press the +1/YES to execute the
data dump. When the data dump has been completed, the display will indicate "Completed."
Dump type
ALL PROG
ALL PERF
GLOBAL
ALL
While a data dump is in progress, do not touch the SGproX.
While you are in this page, system exclusive data can be transmitted and received even if the 3. EX FILTER setting
is "DIS."
Range of settings
When "ALL" is selected, the data will be transmitted in the order of "GLOBAL," "ALL PERF" and "ALL PROG."
Details of data dump are provided in the SGproX MIDI Implementation.
Consult your local Korg distributor for more information on MIDI IMPLEMENTATION.
28
DIS, ENA
ENA
–, + (closed type, open type)
–
–, + (closed type, open type)
–
Transmitted data
Settings for all programs A1 to D16
Settings for all performances A1 to D16
Part of the global data
ALL PROG, ALL PERF, GLOBAL
ALL PROG, ALL PERF, GLOBAL, ALL
Size Transmission time
3665 bytes
17854 bytes
118 bytes 0.1 seconds
21637 bytes
2 seconds
6 seconds
9 seconds