Event Filter - Korg Pa50 User Manual

And here are the events contained in the Master track.
Event First value
Tempo Tempo change
Volume Master Volume value
Meter
Meter change
Scale One of the available pre-
set Scales
UScale (User One of the available
Scale) User Scales
QT (Quarter Altered note
Tone)
QT Clear (Quar- Reset of all Scale
ter Tone Clear- changes
ing)
FXType One of the four avail-
able FX processors
FXSend Feedback Send (B>A or
D>C)
(a) Meter changes can't be edited or inserted. To insert a Meter
change, use the Insert function in the Edit section and insert a
series of measures with the new meter. Existing data can then be
copied or entered to these measures
(b) To edit the Quarter Tone settings, select the first value, then
select the scale's degree to edit. Edit the second value to change
the tuning of the selected note of the scale.
(c) When selecting a different effect number during this edit,
default settings will be assigned to this event.
To change the event type, use the C VOLUME/VALUE but-
tons to select the Event line, then use the same buttons or the
TEMPO/VALUE controls to select a different event type.
To select and edit the event's value, use the F3 and F4 func-
tion keys, and use the G/VOLUME/VALUE buttons or the
TEMPO/VALUE controls.
Length
Length of the selected Note event. The value format is the
same as the Position value.
Note: If you change a length of "000.00.000" to a different
value, you can't go back to the original value. This rather
uncommon zero-length value may be found in the drum and
percussion tracks of Songs made in Backing Sequence mode.
Transport, navigation and editing controls
E/F and H VOLUME/VALUE buttons
These buttons are the "Scroll to previous event" and "Scroll to
next event" controls. They corresponds to the scroll arrows
shown on the screen.
G VOLUME/VALUE buttons
Use these buttons to select the corresponding parameter
value area.
F3 and F4 buttons
After selecting the parameter value area with the G VOL-
UME/VALUE buttons, use these buttons to select, respec-
tively, the first and second value of the event in edit.
Second value
–
–
(a) –
Root note for
the selected
Scale
Root note for
the selected
Scale
Note alter-
(b)
ation
–
(c)
Effect number
Feedback send
level
Song operating mode
SEQ1 PLAY/STOP button
Press PLAY/STOP to listen to the Song in edit. Press PLAY/
STOP again to stop it.
SHIFT + << or >>
Keep the SHIFT button pressed and press the << or >> but-
ton to open the Go to Measure window.
Go to Measure: 1
Enter=Ok
Use the TEMPO/VALUE controls to select a measure, and
press ENTER to confirm, or EXIT to abort.
SHIFT + PAUSE
While the sequencer is running, keep the SHIFT button
pressed, and press the PAUSE button to display the event that
is currently playing. This is called the Catch Locator function.
INSERT
Press the INSERT button to insert a new event at the current
shown Position. The default values are Type = Note, Pitch =
C4, Velocity = 100, Length = 192.
Note: You can't insert new events in an empty, non-recorded
Song. To insert an event, you must first insert some empty mea-
sures. To use the Insert function, press MENU and one of the F
VOLUME/VALUE buttons, then press the PAGE+ button twice.
DELETE
Press the DELETE button to delete the event shown in the
display.
PAGE 25 - EVENT FILTER
This page is where you can select the event types to be shown
in the Event Edit page. You can access this page by pressing
the PAGE+ button while in the Event Edit page.
Edit:Ev.Filter
Note: Off
Prog: Off
Ctrl: Off
T/Meter: Off PaCtl: Off
Turn On the filter for all event types you do not wish to see in
the Event Edit page.
Note Notes.
Prog Program Change values.
Ctrl Control Change events.
T/Meter Tempo and Meter changes (Master Track
only).
Aftt Mono (Channel) Aftertouch events.
PAft Poly Aftertouch events.
Bend Pitch Bend events.
PaCtl Controls exclusive of the Pa50, like the FX and
Scale settings. These controls are recorded to
the Master Track, and saved as System Exclu-
sive data.
103
Page 25 - Event Filter
Exit=Cancel
MTch: Off
PTch: Off
Bend: Off