Disassembling The Cartridge - KTM 690 Enduro EU 2008 Repair Manual

01/FORK, TRIPLE CLAMP

Disassembling the cartridge

5.11
Info
These operations are the same on both fork legs.
–
Remove dust boot
200735-10
–
Remove lock ring
Info
The lock ring has a beveled end where a screwdriver can be applied.
200656-01
–
Heat up the outer tube in area
Guideline
50 °C (122 °F)
–
Pull the outer tube from the inner tube with a jerk.
Info
The lower sliding bushing
200716-10
–
Remove the upper sliding bushing
Info
Without using a tool, carefully pull the stack apart by hand.
200658-01
–
Take off the lower sliding bushing
–
Take off support ring
–
Take off seal ring
–
Take off lock ring
–
Take off dust boot
–
Unclamp the fork leg.
200659-11
–
Disassemble the fork legs. (
.

.

of the lower sliding bushings.

must be pulled from its bearing seat.

.

.

.

.

.

.

p. 17)
19