Adjusting The Riding Sag; Removing The Shock Absorber - KTM 690 Enduro EU 2008 Repair Manual

04/SHOCK ABSORBER, SWINGARM

Adjusting the riding sag

8.8

Removing the shock absorber

8.9
–
Remove the shock absorber. (
–
After removing the shock absorber, clean it thoroughly.
–
Choose and mount a suitable spring.
Guideline
Spring rate
Soft
Medium (standard)
Hard
Info
201352-10
The spring rate is shown on the outside of the spring.
–
Install the shock absorber. (
–
Check the static sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
–
Raise the motorcycle with the work stand. (
–
Remove screws
300562-10
–
Lift the rear fairing.
–
Remove screws
300563-10
–
Remove screw
–
Repeat the operation on the opposite side.
300564-10
p. 36)
75 N/mm (428 lb/in)
80 N/mm (457 lb/in)
85 N/mm (485 lb/in)
p. 37)
.

.

.

p. 34)
p. 34)
p. 9)
36