Connection Table - Fujitsu Primergy TX300 S4 System Configuration And Order-Information Manual

PRIMERGY TX300 S4
[ 3.5inch SATA model ]
Mount
Mountable Cards
Priority
SAS RAID Ctrl
PG-248B
( 8ports / 256MB / without BBU )
High
SAS Ctrl
PG-224B
( 4ports )
SCSI Ctrl U320 PG-2281
SAS Ctrl
PG-228B
( 4ports )
SAS RAID Ctrl
PG-248G
( 8ports / 512MB / with BBU )
Fibre Channel Controller PG-FC202
Fibre Channel Controller
PG-FC203
(8Gbps)
Eth. Ctrl 1x1Gbit PCI-E
PG-289
1000-BASE-T
Eth. Ctrl 1x1Gbit PCI-E
PG-288
1000BASE-SX
Eth. Ctrl 2x1Gbit PCI-E
PG-2861
1000-BASE-T
Eth. Ctrl 1x1Gbit PCI-E
PG-285
1000-BASE-T
Eth. Ctrl 1000-BASE-SX Fibre
PG-1882
LC
Eth. Ctrl 1000-BASE-T Cu PG-1892
Eth. Ctrl 1x1Gbit PCI
PG-1853
1000-BASE-T
Low
Eth. Ctrl 2x1Gbit PCI-X
PG-1863
1000-BASE-T
* [n] : Installation Priority
* # : standard
* - : cannot be installed
(*1) A total of 3 cards can be installed.
(*2) Fibre Channel Controller(PG-FC202) and Fibre Channel Controller (PG-FC203) cannot be installed at a time.
Notes on SATA HDD
1. TX300 S4 (3.5inch SATA model) can be used on a small scale without frequent data access about eight hours a day, for five years.
2. If you would like to use server 24 hours a day, every day, or for database with frequent data access, or for mission-critical tasks which require high reliability,
please purchase another SAS model.
3. Please backup data on a regular basis to prevent loss of data.
4. Dump function of Linux is not available for TX300 S4 (3.5inch SATA model). If you would like to use dump function of Linux, please purchase another SAS model.

Connection Table

Form factor conversion
( Tower to Rackmount )
1 2 3
PCI Express
Bus
x4
lane
x8 socket
PCI Express (x4) # - -
PCI Express (x4) - [1] -
PCI Express (x4) - [1] [2]
PCI Express (x4) - [3] [1]
PCI Express (x4) - - -
PCI Express (x4) - [4] [3]
PCI Express (x8) - [4] [3]
PCI Express (x1) - [5] [4]
PCI Express (x4) - [5] [4]
PCI Express (x4) - [5] [4]
PCI Express (x1) - [5] [4]
PCI-X/64bit - - -
PCI-X/64bit - - -
PCI/32bit - - -
PCI-X/64bit - - -
Rack Conversion kit
(Tower to Rackmount (4U))
PG-R1CK24
PGBR1CK24 (for CTO)
*. In case that Rack Conversion kit is ordered by CTO, mouse is not attached with base unit.
PCI Slot
4 5 6 7
PCI-X PCI Express
Max No.of Mount
64bit/ x4
133MHz lane
Full Height
3.3V x8 socket
- - - - 1
- - - - 1 (*1)
- [3] - - 2
- [4] [2] - 3 (*1)
- [2] [1] - 2
- [2] [1] - 3 (*2)
- [2] [1] - 4 (*2)
- [3] [2] [1] 3
- [3] [2] [1] 3
- [3] [2] [1] 3
- [3] [2] [1] 4
[1] - - - 1
[1] - - - 1
[1] - - - 1
[1] - - - 1
Remarks
Standard, Internal array
Internal SAS Controller
Internal/External SCSI Controller
External SAS Controller
External array
7
No AFT/ALB Support
1
No AFT/ALB Support