BMW 1989-1995 525i Service Manual page 432

720-2
SEAT BELTS
4. Working at upper guide on B-pillar. press down tongue
retaining cable end and remove cable from reversing
wheel and guides.
5. Installation is reverse of installation. Be sure to reattach
all cable retaining clips.
2. Turn screw beneath flap clockwise until display chanq-
es from green to red. See Fig. 3.
3. To activate lock tensione r, turn screw counterclockwise
until green appears in window.
Front seat belt lock tensioner, deactivating
1. Working at side of seat . pry up concealing flap on ten-
sioner.
Tightening Torque
• Front seat belt lock mounting bolt. . . . 48 Nm (36 It-Ib)
0012290
,
~~
I I
3 4
2- - -:
1
....
,
~- 4
1. Bolt 5. Nut
12.
Height adjuster cable assembly
2. Belt lock with tensione r, 6. Bushing
13.
Seat belt height adjuster
late cars
7.
Thrust wa sher 14. Socket head screw
• always deactivate
B .
Sliding piece 15. Socket head screw
3. Belt lock without tensioner. 9. Bracket 16. Cable holder
early
cars
10.
Torx bolt
4.
Bul10n
11.
Hex bolt
00011815
Fig. 2. Exploded View of front seat belt assembly.
FRONT
SEA
T BEL T ASSEMBLY