Adjusting The Speed Limiter - E-TON ATV6A 90 Service Manual

ADJUSTING THE SPEED LIMITER

a
ADJUSTING THE SPEED LIMITER
The speed limiter keeps the carburetor throttle
from becoming fully-opened even when the
throttle lever is applied to the maximum posi-
tion. Screwing in the adjuster stops the engine
speed from increasing.
1. Measure:
• speed limiter length
Out of specification
Speed limiter length
Less than 11.0mm (0.43 in)
2. Adjust:
• speed limiter length
a. Loosen the locknut
b. Turn the adjuster
fied speed limiter length is obtained.
Turning in
Turning out
c. Tighten the locknut.
WARNING
• Particularly for a beginner rider, the
speed limiter should be screwed in com-
pletely. Screw it out little by little as their
riding technique improves. Never remove
the speed limiter for a beginning rider.
• For proper throttle lever operation do not
turn out the adjuster more than 11.0 mm
(0.43 in). Also, always adjust the throttle
lever free play to 1.0 ~ 3.0 mm (0.04 ~
0.12 in).
3 - 12
CHK
ADJ
a
Adjust.
.
in or out until the speci-
Speed limiter length is
decreased.
Speed limiter length is
increased.