Vehicle Speed Limiter - E-TON Viper 150 Owner's Manual

Vehicle speed limiter

1. Loosen the locknut.
2. To increase the maximum engine power available
and the maximum speed of the ATV, turn the
adjusting screw in direction (a). To decrease
the maximum engine power available and the
maximum speed of the ATV, turn the adjusting
screw in direction (b). Do not turn the adjusting
screw out more than 11mm(0.4 in) or the throttle
cable could be damaged. Always make sure
the throttle lever free play is adjusted to
1.0-3.0 mm (0.04-0.12 in). (See page 8-19.)
WARNING
Improper adjustment of the speed limiter and
throttle could cause throttle cable damage or
improper throttle operation. You could lose
control, resulting in an accident.
1
2
1. Locknut
2. Adjusting screw
3. No more than 11 mm (0.4 in)
3. Tighten the locknut.
4-5
3
(b)
(a)
4