Table of Contents
Advertisement
Operation
3.4 Front Panel Operation
Operate the iPump 6400 from the front panel using the push buttons and the LCD. Menu
screens on the LCD direct you to screens that control various operating parameters or
display information about the iPump 6400 . Menu titles represent either a category of control
(such as Unit Setup , Record and Play , and Transport In Setup ) or the name or category of
parameters or information to be displayed (such as RF Status , Active Recordings , or
Navigation Help
LCD Menu
Figure 3.9
User input screens shown below the menus allow control of items such as Program Number
Navigation
to Record
information on use, see User Input Screens on page 20.
Press the...
right and left arrow buttons
top and bottom arrow buttons
ENTER
ESC
Note:
3.5 Front Panel Initial Unit Setup
Some of the iPump 6400 's settings are preconfigured or should be configured during the
iPump 6400
26
).
below illustrates the complete LCD menu structure including user input screens.
, File to Record to , Decoder Number to Play File to , and others. For more
move between menu screens on the
!"
!"#
same level
moves up or down a level
!"
$"%
button
move down to the next level
!"
view the information and user-input
!"
screens within a particular category
button
move up a level
!"
move to the first menu of the current level
!"
return the Home screen
!"
When you reach the last menu of a particular level, pressing the right arrow button
again moves you back to the first menu of that level.
Pressing the ESC button repeatedly always returns you to the Home screen.
Figure 3.9: iPump 6400 LCD menu structure
's initial setup and are not likely to require adjustment on a regular basis. Setup
800009-01 Rev. J
To...
As shown by the arrows...
connecting the left and right
sides of the boxes
connecting the tops and
bottoms of the boxes
connecting the tops and
bottoms of the boxes
www.wegener.com
- Quick Links:
- Physical Description
Hide quick links:
Advertisement
Table of Contents
