Navigation To Unit Label Setup Screen; Unit Label Setup; Figure 3.15: Lcd Menu Navigation To Set Unit Label Screen; Table 3.9: Procedure For Entering Ipump 6400 Unit Label - Wegener iPump 6400 User Manual

Step
3.
4.
Assign a name to the iPump 6400 during the initial setup. Use the front panel navigation
Navigation to
buttons to go to the Unit Label screen as shown in Figure 3.15 .
Unit Label
Setup Screen
Set the Unit Label , the name assigned to the iPump 6400 , during the initial setup. Table 3.9
Unit Label
details the label-entering procedure.
Setup
Note:
Begin from the SET UNIT LABEL screen. To change the screens, see Editable Data Fields
on page 20 and Selectable Fields on page 21 .
Step
1.
2.
www.wegener.com
Press
#
OFFSET FROM GMT
GMT - 5 EST / EDT
Select the appropriate offset from
Offset selections range from
astern td.
E S T
.)
GMT -8
#
DAYLIGHT SAVING TIME
OBSERVED? YES
Select if
Yes Daylight Saving Time
area or if it is not.
No

Figure 3.15: LCD menu navigation to Set Unit Label screen

Refer to User Input Screens on page 20 for information on updating the editable
and selectable screens.

Table 3.9: Procedure for entering iPump 6400 Unit Label

Press
ENTER U. LABEL A B C D E F G H I
J K L M N O P Q R
Note: Additional characters including numerals,
decimal, space, and hyphen appear as you move
downward through the available characters.
Select additional characters until the
completely at the bottom left of the LCD.
ESC DONE? <YES> <NO - ESC>
_________________
Press ENTER to confirm the unit label or ESC to return to
the UNIT LABEL screen.
800009-01 Rev. J
Displayed/Field Details
reenwich
G
to
GMT -12
ime is at ; U.S. acific
GMT -5 P
is observed in your
Displayed/Field Details
Unit Label
iPump 6400 User's Manual
Screen Type
Selectable
ean ime.
M T
. (U.S.
GMT +11
td. ime is at
S T
Selectable
Screen Type
Editable
is displayed
Selectable
31