6400 Q UICK TART UIDE Figure 4. iPump Web Interface Status Page 6. Shut down your iPump from the front panel. Navigate from the home screen to the Shutdown screen as follows: Step Press Display / Field Details UNIT SETUP...
Wegener Communications, Inc. Technology Park/Johns Creek 11350 Technology Circle Duluth, GA 30097-1502 Phone: 770-814-4000 Fax: 770-623-0698 The Wegener iPump 6400 is approved under FCC Part 15B Class A, UL1950, CSA, and CE. 800009-03 Rev. A ENVOY UNITY Professional Video Step...
Page 3
6400 Q UICK TART UIDE To configure your iPump's decoder output from the screen to the Home Decoder Setup Step Press Display / Field Details ENTER RECORD AND PLAY DECODER SETUP ENTER DECODER NUMBER (Available decoders are 1 and 2. If your iPump has only one decoder, this Decoder Number screen will not appear.
6400 Q UICK TART UIDE Y our LAN line to the iPump's Ethernet port (d d ) [10/100baseT; female RJ-45 connector] Figure 1. iPump Rear-Panel Connectors The Alarm port (e e , Figure 1) on the rear panel may be used to provide a contact closure during alarm conditions or on command from Compel.
6400 Q UICK TART UIDE The liquid crystal display (LCD) provides menu, data, and input screens to the user. Menu screens are entry points to further screens showing signal or unit status or to user-input screens that can be changed by the user. The "home" screen displays the...
Page 6
6400 Q UICK TART UIDE Step Press Display / Field Details ENTER UNIT SETUP UNIT SETUP ENTER RECORD AND PLAY DECODER SETUP AUDIO SETUP IP SETUP RF SETUP Note: To enter data in editable fields, press r r and down s s arrow buttons to increment the highlighted character or digit.