Editable Filename Field
Another type of Editable Field appears when filenames must be entered. Figure 3.4 shows
an example of a user-input screen with an editable filename field.
1. Press ENTER to begin spelling the filename. The LCD highlights the letter A in the
character list.
2. Press the arrow buttons to move through the character list until the LCD highlights the first
character of the filename. Additional characters including numerals, decimal, space, and
hyphen appear on the LCD as you move downward through the available characters list.
3. Press ENTER to confirm the first character. The first character is displayed at the bottom
left of the LCD.
4. Select additional characters as in steps 2 and 3 until the LCD displays the entire filename at
the bottom left of the LCD.
5. When the LCD displays the entire filename, press ESC to stop editing. When prompted,
Done?
Selectable Fields
Other user-input screens allow selection from a list of options. Figure 3.5 shows an example
of a user-input screen with a selectable field.
1. Press ENTER to open the field. The current selection starts blinking.
2. To view available options one at a time, press the up or down arrow buttons.
3. To save a selection, press ENTER when the LCD displays the desired option. To cancel any
changes, press ESC before pressing ENTER .
These eight light-emitting diodes (LEDs) provide status information about the iPump 6400
LED
and its processes. Table 3.1 on page 22 provides the meaning of the color and state of each
Indicators
LED.
www.wegener.com
Figure 3.4: Editable filename field
, press ENTER if the filename is correct or ESC to continue editing your entry.
Figure 3.5: Selectable field
Figure 3.6: iPump 6400 front panel LED indicators.
800009-01 Rev. J
iPump 6400 User's Manual
21