Front Panel Additional Unit Setup; Navigation To Date/Time Setup Screen; Date/Time Setup; Figure 3.14: Lcd Menu Navigation To Date/Time Setup Screen - Wegener iPump 6400 User Manual

Operation

3.6 Front Panel Additional Unit Setup

Some of the iPump 6400 front panel settings are important, but not essential to the unit's
initial setup including:
Set up the date and time for the iPump 6400 during the initial setup. Use the front panel
Navigation to
navigation buttons to go to the Date/Time screen as shown in Figure 3.14 .
Date/Time
Setup Screen
When operating under the Compel network, date and time settings are overwritten by
Date/Time
Setup Compel
control and should be set by the user.
From the Date/Time screen, you can set or adjust the:
Note:
Table 3.8
Begin from the Date/Time Setup screen.To change the screens, see Editable Data Fields on
page 20 and Selectable Fields on page 21 .
Step
1.
2.
30

Date/Time Setup

!"
Unit Label Setup
!"
HTTP Proxy settings
!"
Return Path Setup
!"

Figure 3.14: LCD Menu navigation to Date/Time Setup screen

. However, Time zone and Daylight Savings Time settings remain under local
current date
!"
current time
!"
offset from GMT (Greenwich Mean Time)
!"
DST (Daylight Savings Time) observance
!"
may also be performed from the web browser. See Date / Time
Date/Time Setup
on page 41.
Setup
on page 30 details the procedure for adjusting the Date/Time settings.

Table 3.8: Procedure for setting Date/Time parameters

Press
ENTER CURRENT DATE
YYYY / MM / DD
Enter
Current Date
#
CURRENT TIME
HH: MM: SS
Enter
Current Time
800009-01 Rev. J
Displayed/Field Details
in format.
year/month/day
in
hours:minutes:seconds
Screen Type
Editable
Editable
format.
www.wegener.com