Files Served To Lan; Compel Control; Html Control; Contact Closure/Alarms - Wegener iPump 6400 User Manual

General Information
be particularly useful in applications with extended or continuous playout needs and limited
satellite operating times.

Files Served to LAN

Users sharing a LAN with the iPump 6400 may download stored files from the iPump 6400
to their local workstation or server using FTP or SMB protocol.

Compel Control

iPump 6400
Conditional Access controls which iPump 6400 s may access the satellite's material and
prevents access by any other receive equipment. Local control of the unit may be disabled
for exclusive control by Compel . The iPump 6400 always follows the most recent command
received and does not prioritize commands based on origination from the front panel, web
browser interface, or Compel network.

HTML Control

Control of the iPump 6400 is available from any web browser on the LAN to which it is
connected or via the internet if desired. The IP address and subnet mask can be displayed
and changed at the iPump 6400 front panel.

Contact Closure/Alarms

The iPump 6400 provides a contact closure through a rear-panel connector whenever the
unit enters an alarm condition. An additional user relay is also available. The iPump 6400
can also sense a contact closure input. Using Compel , file playouts can be triggered by
local closure of this input.
The iPump 6400 Professional Media Server is available in several configurations to meet
iPump 6400
specific applications. Input type, decoder type, disk storage capacity, Conditional Access,
Options
and the presence of a second decoder can be varied to create models best suited for your
specific needs.
The iPump 6400 model number is structured as follows to describe the options on each
iPump 6400
Table 1.1
Model Number
4
operation may be controlled remotely by a Compel network. Compel
: IP - ABC - D - EF - G - HH - JKK
lists the options in each equipment category.

Table 1.1: iPump 6400 options key

Option Name
Position
This prefix simply indicates that the unit is an
IP
First Decoder Type
A
(top slot)
0 - No decoder
1 - Basic decoder
2 - professional 4:2:0 decoder with analog outputs
3 - professional 4:2:2 decoder with analog outputs
4 - professional 4:2:2 decoder with digital outputs
5 - professional audio output
6 - professional 4:2:0 decoder with analog outputs
and channel 3-4 modulator connector
800009-01 Rev. J
Designator Description
.
iPump
www.wegener.com