File Streaming And Routing; Scheduled Operation; Figure 3.25: Ipump 6400 Web Browser Streams Tab - Wegener iPump 6400 User Manual

For multicast streaming you can select to stream from existing files or a live classical DVB
File Streaming
program.
and Routing
1. Click the Streams tab on the web browser.
2. If streaming from an existing file, select a file from the Streaming Files list. The name of
the current directory is shown just above the list of files. When displayed, you may double
click [-Previous Directory-] to view file names in the next higher directory. Or, double click
any selection displayed in red text inside square brackets (such as [directoryname] ) to
move down to that directory level.
3. If streaming live from a "classical" DVB program, select the program to stream from the
Program/Language
4. Click inside the Multicast Destination: box and type the appropriate IP address. Also enter
the UDP Port number in the UDP Port: box.
5. When the address information and selected file or stream information are correct, click the
Start File Stream:
6. To stop file streaming, click the Click to Stop hyperlink in the Stream/Status box.
From the web browser, you can view schedules of Record and Play operations set up by the
Scheduled
Operation Compel
If needed, click Disable to temporarily suspend scheduled operations. Click Enable to return
to scheduled operations. The iPump 6400 resumes performing operations according to the
scheduled times. Operations scheduled for times during which the unit is "disabled" are not
performed.
www.wegener.com

Figure 3.25: iPump 6400 web browser Streams tab

Stream Status
Click To Stop hyperlinks
pull-down list under Stream Live Program .
or Start Live Stream: button respectively to begin streaming.
network for the iPump 6400 by clicking the Schedule tab
800009-01 Rev. J
iPump 6400 User's Manual
Streaming Files Stream Live Program
51