Streaming media decoder enterprise media server (5 pages)
Summary of Contents for Wegener i6420
Page 1
INTRODUCTION This Quick Start guide provides direction on how to quickly set up and start operating the i6420 professional media server in order to receive WestwoodOne programming. For complete information please go to: www.dg-tech.net Please expedite the installation of this receiver as it must be installed and online no later than four weeks from the original ship date.
1. 6) Plug the receiver into a reliable, stable and properly grounded power source. a. Note: Wegener and WestwoodOne strongly recommend that you use an Uninterruptible Power Supply (UPS) with power line filtering to prevent damage to the unit during electrical storms or power surges.
Page 3
Atlanta Falcons NFL Programming Atlanta Falcons NFL Relays Function Function Relay Functions Relay 1 Local Stopset Start Liner / ID Relay 2 Relay Commons End of Game Relay 3 Not Used Relay 4 Note: All relay commons are ganged inside the receiver. Please contact WestwoodOne support if you require isolated commons.
Do not open the iPump 6420's chassis cover as this will void the limited product warranty. Location and Mounting The iPump i6420 should be mounted in a standard 19-inch equipment rack. After mounting, maintain a clean, dry environment for the unit.
Page 7
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Rack Installation Procedure The iPump i6420 is sized at 1 RU and will fit an EIA-standard, 19-inch-wide equipment rack. 1) Install angle brackets or cross-supports capable of supporting both the unit and its connecting cables.