1.3 Ipump 6400 Specifications; Technical Specifications; Table 1.2: Ipump 6400 Technical Specifications I - Wegener iPump 6400 User Manual

General Information

1.3 iPump 6400 Specifications

Technical
Specifications
RF
Video Compression
Video Output
Audio Compression
Audio Output
6

Table 1.2: iPump 6400 technical specifications i

Characteristic
Input Frequency
Input FrequencyRange
Input Impedance
LNB Power
Tuning Resolution
Modulation
Transport Rate Range
Video Data Rate
Compression Type
Horizontal Resolution
Vertical Resolution
Video Format
Output Level
Output Impedance
Compression Type
Data Rate
Output Modes Supported
Frequency Response
800009-01 Rev. J
Specification
tuning via front panel control or
950 to 2150 MHz
75 ohms
250 mA max, 22 kHz tone control
vertical polarity: 12.4 to 14.0 VDC
horizontal polarity: 17.0 to 19.0 VDC
1 kHz
QPSK
2.0 to 45 Msps
up to 15 Mbps per service
MPEG 4:2:0 or 4:2:2
720, 704, 640, 544, 480, 352
480 lines @ 30 Hz (NTSC)
240 lines @ 30 Hz (NTSC)
576 lines @ 25 Hz (PAL)
288 lines @ 25 Hz (PAL)
NTSC/PAL composite and SDI (with embedded audio)
1 Vpp ± 5%
75 ohms
MPEG Layer II
64 to 384 kbps
Mono, Dual Mono, Joint Stereo
20 Hz to 20 kHz
Compel
www.wegener.com