Front-Panel Operation; Lcd Menu Navigation - Wegener iPUMP6400 User Manual

iPump6400 User's Manual

3.4 Front-panel Operation

Operate the iPump6400 from the front panel using the push buttons and LCD.
Menu screens on the LCD direct you to screens that control various operating
parameters or display information about the iPump6400. Menu titles represent
either a category of control (such as Unit Setup, Record and Play, and RF
Setup) or the name or category of parameters or information to be displayed
(such as RF Status, Active Recordings, or Navigation Help).
LCD Menu Refer to Figure 3.5 which illustrates the complete LCD menu structure. Informa-
Navigation tion and user-input screens beneath these menus are described later. Press the
right and left arrow buttons to move between menu screens on the same level
(represented in the illustration by arrows connecting the left and right sides of the
boxes). When you reach the last menu of a particular level, pressing the right
arrow button again will move you back to the first menu of that level. Press the
ENTER button to move down to the next level of the menu structure (represented
in the illustration by arrows connecting the top and bottom sides of boxes) or to
view the information and user-input screens within a particular category. Press
the ESC button to move up a level or to the first menu of the current level. Press-
ing the ESC button repeatedly will always return you to the Home Screen.
800009-01 Rev. B
Figure 3.5 LCD Menu Structure
36 wegener.com