Character Position Adjustment - Sony DSR-570WS Service Manual

9-3-14. Character Position Adjustment

Equipment: Color monitor (or, B/W monitor)
Preparation:
. OUTPUT/DL/DCC+switch (side panel) → BARS
Test point: MONITOR OUT connector
Adjustment Procedure
1. Set the "MARKER" to "ON" on the "PAGE 6" of
Basic menu.
2. Set the "MARKER" to "CENT/90 %" on the
"PAGE 4" of Advanced menu.
3. Select "PAGE 9" on the Advanced menu, set
"16:9/4:3" to "16:9" position.
PAGE 9 (NEXT PREV
16:9/4:3 : 16:9
WIDE ID : ON
VF SCAN : AUTO
EXIT MENU (YES )
4. Adjusting point: 1CV502/AT-150B board
Specification: "a" = "b"
(The space between "a" and "b" are
nearly equal)
AT-150B BOARD -A SIDE-
9-14
) Safty zone
TONE
"b"
TONE
XXdB
XXdB
"a"
XXXX
XXXX
CV502 CV501
9-3-15. 4:3 Title Adjustment
Equipment:
Color monitor (or, B/W monitor)
Preparation:
. OUTPUT/DL/DCC+switch (side panel) → BARS
Test point:
MONITOR OUT connector
Adjustment Procedure
1. Set the "MARKER" to "ON" on the "PAGE 6" of
Basic menu.
2. Set the "MARKER" to "CENT/90 %" on the
"PAGE 4" of Advanced menu.
3. Select "PAGE 9" on the Advanced menu, set
"16:9/4:3" to "4:3" position.
4. Select "PAGE 8" on the Advanced menu, set "CLOCK
IND" to "CAM".
5. The day and time will be displayed when exiting from
the menu.
6. Adjusting point: 1CV501/AT-150B board
Specification:
"a" = 0
[for NTSC] (The line of color bar shall touch the number.)
99 03 11
a
[for PAL] (The line of color bar shall touch the colon.)
99 03 11
10:22:33
a
n
After adjustment, set the clock "T" for the present time.
0 3
a
99 0 3 11
10 22 33
a
DSR-570WS/570WSP V1