Character Position Adjustment; Title Adjustment - Sony DXC-D30WSP Service Manual

3-3-16. Character Position Adjustment

Equipment: Color monitor (or, B/W monitor)
Preparation: OUTPUT/DL/DCC+ switch/camera side
Test point: MONITOR OUT connector/camera side
Adjustment Procedure
1. Set the "MARKER" to "ON" on the BASIC menu.
2. Set the "MARKER" to "CENT/90 %" on the
"PAGE 4" of ADVANCE menu.
3. Select "PAGE 9" on the ADVANCE menu, set
"16:9/4:3" to "16:9" position.
PAGE 9 (NEXT PREV )
16:9/4:3 : 16:9
WIDE ID : ON
VF SCAN : AUTO
EXIT MENU (YES )
4. Adjusting point: 1CV3/MB-785 board
"a" = "b"
Specification:
(The space between "a" and "b" are
nearly equal)

3-3-17. 4:3 Title Adjustment

Equipment: Color monitor (or, B/W monitor)
Preparation: OUTPUT/DL/DCC+ switch/camera side
Test point: MONITOR OUT connector/camera side
Adjustment Procedure
1. Set the "MARKER" to "ON" on the BASIC menu.
2. Set the "MARKER" to "CENT/90 %" on the
"PAGE 4" of ADVANCE menu.
3. Select "PAGE 9" on the ADVANCE menu, set
"16:9/4:3" to "4:3" position.
4. Select "PAGE 8" on the ADVANCE menu.
3-12
→ BARS
Safty zone
TONE
"b"
TONE
XXdB
XXdB
"a"
XXXX
XXXX
→ BARS
PAGE 8 (NEXT PREV )
CLOCK IND : CAM
CLOCK SET
: (START )
9 7 1 1 0 8
1 4 : 5 9
EXIT MENU (YES )
5. Set "CLOCK IND" to "CAM" position, (See above
monitor screen) and set the cursor to "CLOCK SET"
position. Push the UP 4 switch, then, "(START → 4)"
is changed to "(END → 4)" and the TITLE is
displayed.
PAGE 8 (NEXT PREV )
CLOCK IND : CAM
CLOCK SET : (START )
Y Y M M D D
9 7 1 1 0 8
1 4 : 5 9
EXIT MENU (YES )
* In case of "DD MM YY", the adjustment is the same
manner.
MM DD YY
Note : In case of "
11 08 97
as follows.
MM DD YY
11 08 97
6. Adjusting point: 1CV1/MB-785 board
"a" = 0
Specification:
Note : After adjustment, set the clock "T" for the
present time.
MB-785 BOARD -B SIDE-
TONE
XXdB
XXXX
Y Y M M D D
9 7 1 1 0 8
"a"
TONE
XXdB
"T"
", set the DATE position
"a"
CV1
CV3
DXC-D30WS/P(E)/V1