Replacing The Fan Motor - Sony DSR-570WS Service Manual

2-15. Replacing the Fan Motor

1. Remove the right panel. (Refer to Section 2-2-2.)
2. Remove the four precision screws (P2.6 x 5), then the
key panel sub assembly.
3. Disconnect the connector CN6 on the FP-118A board.
4. Remove the two screws (PS2 x 6), then remove the fan
motor.
2-38
Fan motor
FP-118A board
CN6
Precision screws
P2.6 x 5
Key panel sub assembly
Precision screws
P2.6 x 5
Screws PS2 x 5
DSR-570WS/570WSP V1