Maintenance Menu Settings
1. Press the MENU button while pressing the SHIFT
button, and release the SHIFT button while pressing the
MENU button. Check that "600_-FF" is displayed on
the LCD screen after about 1 second, and then release
the MENU button.
2. Press the RESET button to blink "oFF," and press the
ADVANCE button to display "on."
3. Press the RESET button to blink "600" to enable the
maintenance menu, and press the ADVANCE button to
display "660."
4. Press the RESET button to check the display so that it
is "660_tAdj."
DSR-570WS/570WSP V1
10-5-1. PB Y SYNC Level Adjustment
MENU No.:
PAGE 10 VTR SYNC
Measuring point: S-VIDEO (Y) OUT
VTR MODE:
PB
Tape:
75 % Full Color bars/XH5-1A
100 % Full Color bars/XH5-1AP
DSR-570WS : A = 286 ± 4 mV
Specification:
DSR-570WSP : A = 300 ± 4 mV
Adjustment Procedure
Perform adjustment by turning the MENU dial, and store
the data by pushing the MENU dial.
For DSR-570WS
For DSR-570WSP
10-15