Replacement Of Mode Slider/Cam Gear/Threading Gear - Sony DSR-570WS Service Manual

6-29. Replacement of Mode Slider/Cam Gear/Threading Gear

Mode: Unthreading end
Replacement Flowchart
Removal of SV-213 board
Removal of HN-227 board
Removal of capstan motor
Removal of drum assembly
Removal of counter weight assembly
Removal of soft brake arm (S)
Removal of sensor attachment plate
Removal of TR band assembly
Removal of TR arm assembly
Removal of prism holder
Removal of TG-1/TG-8 base assembly
Removal of pinch arm assembly
Removal of GL (S) assembly
Removal of GL (T) assembly
Replacement of mode slider assembly
Tape guide height check/adjustment
Capstan FG DUTY adjustment
Reel table FWD/REW rewinding torque check/adjustment
TR arm assembly position check/adjustment
FWD back tension check/adjustment
Tracking adjustment
Check after tracking adjustment
Check of self-recording tape playback
Switching position adjustment
DSR-570WS/570WSP V1
Removal
1. Remove the SV-213 board. (Refer to Section 2-9-8.)
2. Remove the HN-227 board. (Refer to Section 2-9-9.)
3. Remove the capstan motor. (Refer to Section 6-28.)
4. Remove the drum assembly. (Refer to Section 6-3.)
5. Remove the counter weight assembly. (Refer to Section 6-16.)
6. Remove the soft brake arm (S). (Refer to Section 6-6.)
7. Remove the sensor attachment plate. (Section 6-15.)
8. Remove the TR band assembly. (Refer to Section 6-12.)
9. Remove the TR arm assembly. (Refer to Section 6-16.)
10. Remove the prism holder. (Refer to Section 6-22.)
11. Remove the TG-1/TG-8 base assembly.
(Refer to Section 6-22.)
12. Remove the pinch arm assembly. (Refer to Section 6-22.)
13. Remove the GL (S) assembly. (Refer to Section 6-17.)
14. Remove the GL (T) assembly. (Refer to Section 6-18.)
Replacement of cam gear Replacement of threading gear
6-39