Table of Contents
Advertisement
6-2-20. Page D Data Modification 2
After the camera adjustment, change the data of page D and ad-
dress 01 to the following:
PCS-C150 (NTSC) Data: 04
PCS-C150P (PAL) Data: 05
6-2-21. Page 5 Data Initialization
Initializing method:
1) Page: B, address: 00, data: 01.
2) Check that the data of page: B, address: 02 is 00.
3) • PCS-C150 (NTSC)
Set data: 80 to page: B, address: 01 and press the PAUSE
button of the adjusting remote commander.
• PCS-C150P (PAL)
Set data: 81 to page: B, address: 01 and press the PAUSE
button of the adjusting remote commander.
4) Check that the data of page: B, address: 02 is 01.
5) Turn off the main power supply once.
6-2-22. Home Position Adjustment
Home position adjustment for Pan-Tilter is performed automati-
cally.
Adjustment Page
5
Adjustment Address
50, 51, 52, 53, 54, 55, 56, 57, 58, 59
Adjusting method:
1) Set data: 01 to page: B, address: 00.
2) Check that the data of page: B, address: 02 is 00.
3) Set data: 10 to page: B, address: 01 and press the PAUSE button
of the adjusting remote commander.
4) Check that the data of page: B, address: 02 is 01.
5) Set data: 40 to page: 5, address: 5E and press the PAUSE button
of the adjusting remote commander.
6) Turn off the main power supply once.
Note: When the camera block has been removed from the pan tilt
mechanism chassis, be sure to perform Home Position Ad-
justment.
6-3. ELECTRICAL BLOCK CHECK
6-3-1. Pan Tilter Operation Check
Checking method:
1) Use VISCA to send the commands to move the pan tilter
horizontally and vertically.
2) Drive the pan tilter to the top and bottom end points and to left
and right end points.
3) Check that the tilter operates normally.
6-24
E
Advertisement
Table of Contents
