Sony DSR-570WS Service Manual page 147

6-20. Replacement of T Reel Plate
Assembly
Reel table position: Standard cassette position
Replacement Flowchart
Removal of sub reel gear (T) assembly
Removal of T reel table assembly
Removal of SV-213 board
Replacement of T reel plate assembly
T reel table height check/adjustment
Reel table assembly FWD/REV rewinding torque
check/adjustment
Check after tracking adjustment
Check of self-recording tape playback
Removal
1. Remove the sub reel gear (T) assembly.
(Refer to Section 6-11.)
2. Remove the T reel table assembly.
(Refer to Section 6-5.)
3. Remove the SV-213 board.
(Refer to Section 2-9-8.)
4. Remove the reel plate holder shown in the figure,
and remove the T reel plate assembly.
Attachment
5. Attach the new T reel plate assembly in the
reverse order of step 4.
6. Attach the parts removed in the reverse order of
steps 1 to 3.
Check/Adjustment
7. Perform T reel table height check/adjustment.
(Refer to Section 6-36.)
8. Perform the reel table assembly FWD/REV
rewinding torque check/adjustment.
(Refer to Section 6-38.)
9. Perform the check after tracking adjustment.
(Refer to Section 7-4.)
10. Perform the check of self-recording tape
playback. (Refer to Section 7-5.)
DSR-570WS/570WSP V1
T reel plate assembly
Reel plate holder
6-29