Wire Connection To Access Controller - IDTECK SRK101 Hardware Manual

9. Wire Connection to Access Controller

9-1. Wiring for Controlling Green LED (Default)
SRK101/SRK101U
SRK101B
- SRK101/SRK101U/SRK101B transmits the card/keypad data to the Access Controller via
Wiegand Data1 and RS232(TX) wires. (34/26bit Wiegand, 8bit burst, RS232)
9-2. Wiring for Controlling Red, Green, and Yellow LEDs (Optional)
SRK101/SRK101U
SRK101B
- SRK101/SRK101U/SRK101B transmits the card/keypad data to the Access Controller via
Wiegand Data0, Wiegand Data1 and RS232(TX) wires. (34/26bit Wiegand, 8bit burst, RS232)
Output Format: 34bit Wiegand + RS232 (Card) + 8bit Burst (PIN)
Output Format: 26bit Wiegand + RS232 (Card) + 8bit Burst (PIN)
Output Format: 34bit Wiegand + RS232 (Card) + 8bit Burst (PIN)
Output Format: 26bit Wiegand + RS232 (Card) + 8bit Burst (PIN)
13