miniature aircraft Fury 55 X-CELL Assembly Instructions Manual page 38

Locate bag 6, and the hardware for bag 6. Please take the time to identify the hardware for this bag.
Apply a small amount of
medium thread lock when
threading into metal parts
Illustration 6a
0133 SnAPED
In PoSITIon
THREADED
HoLE
0064-3
2x
Locate the MA128-180 head block assembly, MA128-195 head button, two MA128-192 flybar control arms, two MA128-189 flybar control bar,
four MA0133 ball links, two MA0337 m2x30 threaded control rods, two MA0112 m3x9.5 threaded control balls, four MA0064-3 m3x6 button
head socket bolts, and one MA0067 m3x14 socket bolt. Refer to Illustration 6a for this step. Thread the four MA0331 ball links onto the two
MA0337 m3x30 threaded control rod. These control rods should be made so that 13.75mm of threaded control rod is visible between the ball
links. See page 44 for control rod lengths. Snap each completed control rods onto the MA128-189 flybar control bar. Thread the MA0064-3
m3x6 button head socket bolts through the MA128-192 flybar control arms and into each MA128-189 flybar control bar. The MA128-192 flybar
control bar fits into the bearing of the seesaw, note that the threaded holes on the MA128-192 flybar control bars should be facing "up". Thread
the two MA0112 m3x9.5 threaded control balls into the seesaw. Install the head button using the MA0067 m3x14 socket bolt.
Illustration 6b
128-190
Locate the MA128-192 flybar from bag 4, two MA128-190 flybar paddles, and two MA0057 m4x4 socket set screws. Refer to Illustration
6b for this step. Note the two flat spots on the MA128-193 flybar. They are used to locate the flybar correctly in the flybar control assembly.
Slide the MA128-193 flybar into the flybar control assembly and thread in the two MA0057 m4x4 socket set screws into the flybar assembly,
ensuring the set screws are tightened onto the flat spots. Place a drop of medium CA (cyanoacrylate) on the flybar threads. Thread on the
MA128-190 flybar paddles onto the flybar until the threads are no longer visible, ensuring the paddles are parallel with one another. the
distance between the flybar paddle and the flybar control arm must be the same for each side.
0067
128-195
0112
128-189
128-192
0057
noTE:
fLAT on fLyBAR
foR SET SCREW
bag 6
THREADED
HOLE
128-189
128-180
0112
AggRESSIvE LoCATIon
0057
128-193
38
0064-3
2x
0133
0337
0133
128-190
noRMAL LoCATIon