miniature aircraft Fury 55 X-CELL Assembly Instructions Manual page 14

Illustration 1g
0586-16
128-17
Locate the MA128-17 left servo mount, the MA128-18 right servo mount, two MA0586-16 corner blocks, and eight MA0060-1
m3x6 socket bolts. Refer to Illustration 1g for this step. Attach the MA0586-16 corner block to the MA128-17 left servo mount, and
MA128-18 right servo mount. These servo mounts will now mount to the right and left side frames, using MA0060-1 m3x6 socket
bolts. Note that the corner blocks of both servo mounts are installed inside the main frames as shown in the illustration.
Illustration 1h
Locate the MA128-19 gyro plate, the MA128-16 anti-rotation guide, two MA0060-1 m3x6 socket bolts, two MA0067 m3x14 socket
bolts, and two MA0064-3 m3x6 button head socket bolts. Refer to Illustration 1h for this step. Attach the MA128-16 anti-rotation
guide to the front of the servo mounts using the MA0064-3 m3x6 button head socket bolts. There is a PEM nut installed into the
servo mount at the factory. Attach the MA128-19 gyro plate to the boom clamps using two MA0060-1 m3x6 socket bolts on the left
side. On the right side of the MA128-19 gyro plate, use two MA0067 m3x14 socket bolts, but do not fully tighten at this time.
0060-1
2x
0060-1
2x
0064-3
2x
0060-1
2x
noTE:
NOTE:
THE CoRnER BLoCKS of BoTH
THE CORNER BLOCKS OF BOTH
SERvo MoUnTS ARE InSTALLED
SERVO MOUNTS ARE INSTALLED
BEHInD THE MAIn fRAMES
BEHIND THE MAIN FRAMES.
0060-1
128-16
14
Apply a small amount of
medium thread lock when
threading into metal parts
128-18
0586-16
0067
noTE: BoLTS ARE
noT TIgHT AT THIS TIME
0060-1
128-19
0060-1
2x