miniature aircraft Fury 55 X-CELL Assembly Instructions Manual page 12

128-34
128-57
2x
128-58
Illustration 1c
Locate the MA128-34 radio plate, two MA128-57 aluminum tray mounts, four MA128-58 frame spacers, two MA128-90 tank plate
threaded stud mounts, five MA0060-1 m3x6 socket bolts, and four MA0064-3 m3x6 button head socket bolts. Refer to Illustration 1c for
this step. Attach the MA128-34 radio plate to the two MA128-57 aluminum tray mounts using four MA0064-3 m3x6 button head socket
bolts then attach the radio tray to the right side frame using two MA0060-1 m3x6 socket bolts. Attach the MA128-58 frame spacers.
Note that in Illustration 1c, three of the four MA128-58 frame spacers use a MA0060-1 m3x6 socket bolt to attach to the right main
frame side, but the most rearward MA128-58 frame spacer uses a MA128-58 tank plate threaded stud mount. The other MA128-90 tank
plate threaded stud mount, installs into a PEM nut in the frame.
Illustration 1d
128-65
Locate the MA128-67 aluminum pulley mount, two MA128-70 aluminum idler pulley's (note that the bearings have been installed at the
factory), two MA0067 m3x14 socket bolts, two MA128-65 aluminum mounting blocks and six MA0060-1 m3x6 socket bolts. Refer to
Illustration 1d for this step. Take care when inserting the MA0067 m3x14 socket bolt through the bearing in the MA128-70 aluminum
idler pulley not to get any thread locking compound into the bearing itself. Use two MA0060-1 m3x6 socket bolts to attach the tension
pulley assembly to the right main side frame. Use four MA0060-1 m3x6 socket bolts to attach the two MA128-65 aluminum mounting
blocks to the outside of the right main side frame.
0064-3
4x
128-58
2x
128-90
AT THIS LoCATIon
0060-1
2x
128-65
0060-1
2x
0060-1
3x
128-58
0060-1
2x
12
Apply a small amount of
medium thread lock when
threading into metal parts
0060-1
2x
128-90
128-90
0067
2x
128-70
2x
128-67