Table of Contents
Advertisement
128-128
128-123
Illustration 2d.1
Locate the MA128-123 fan shroud set, the MA128-125 shroud deflector, two MA128-128 rubber "o" rings, and four MA0029 m2x2x13
Phillips self tapping screws. Refer to Illustration 2d.1, 2d.2 and 2d.3 for this step. Bring the two sides of the MA128-123 fan shroud
set together with the MA128-125 shroud deflector between them. If there is flashing on the MA128-123 fan shroud, it can be easily
trimmed with a razor knife. Note the correct orientation of these parts in the illustration. Use the four MA0029 m2.2x13 self tapping
Phillips screws to join the fan shroud set together. Stretch the two MA128-128 rubber "o" rings over the alignment tabs as shown.
Illustration 2e
Place the completed fan shroud assembly onto the completed engine assembly. This will install from the left side of the main frame
assembly. Refer to Illustration 2e.
128-125
0029
4x
20
128-128
Illustration 2d.3
Illustration 2d.2
Hide quick links:
Advertisement
Table of Contents
