miniature aircraft Fury 55 X-CELL Assembly Instructions Manual page 18

Locate bag 2, and the hardware for bag 2. Please take the time to identify the hardware for this bag.
0057
Illustration 2a
Locate the MA128-118 hex start adaptor, MA128-120 clutch drive bearing block, MA128-110 clutch bell unit, MA128-109 start
shaft assembly, MA0273 steel shim washer, and two MA0057 m4x4 set screws. Insert the MA128-109 start shaft assembly into
the MA128-110 clutch bell unit. Refer to Illustration 2a for this step. Place the MA0273 steel shim washer onto the top of the start
shaft. Insert the start shaft through the MA128-120 clutch drive bearing block, taking note of the orientation of the block. Insert the
MA128-118 hex start adaptor onto the start shaft, and line up the flat spot with the threaded hole on the hex start adaptor. Thread the
MA0057 m4x4 set screw into the hex start adaptor, taking care not to allow vertical play in the start shaft assembly.
Illustration 2b
Locate the frame assembly from bag 1, the clutch assembly you just assembled, and four MA0061 m3x8 socket bolts. Refer to
Illustration 2b for this step. Insert the clutch assembly into the frame assembly, thread the four MA0061 m3x8 socket bolts into the
clutch drive bearing block.
bag 2
128-118
128-120
0273
128-110
128-109
0061
2x
18
0061
2x
CLUTCH ASSEMBLy
Apply a small amount of
medium thread lock when
threading into metal parts