miniature aircraft Fury 55 X-CELL Assembly Instructions Manual page 32

Apply a small amount of
medium thread lock when
threading into metal parts
0039-2
4=SERvo
Illustration 5c
Locate the MA128-172 G-10 servo retainers, the carbon fiber cyclic servo spacers, eight MA0039-2 m2.5x16 Phillips bolts, and two
of the servos you have chosen for cyclic control of the swashplate. Please refer to Illustration 5c for this step. Miniature Aircraft USA
realizes that there are many different brands and models of servos available, and many have slightly different servo arm heights. We
have included the spacers required for proper alignment of the control rod for nearly any servo available. Using the MA0039-2 m2.5x16
Phillips bolts and MA128-172 G-10 spacers OR MA128-173 carbon fiber spacers mount the left and right cyclic servos as shown in the
illustration. Do not mount the servo arms to the servos at this time. There already are PEM nuts pressed into the cyclic servo mounts for
this purpose. NOTE: you may have to change the servos spacers in a later step to insure proper alignment of the control rod.
gyRo LoCATIon
Illustration 5d
Locate two MA128-170 plastic servo blocks, the MA128-172 G-10 servo retainers, four MA0039-2 m2.5x16 Phillips bolts, and
one more cyclic servo. Refer to Illustration 5d for this step. Using the MA128-170 plastic servo blocks, the MA128-172 G-10 servo
retainers and the MA0039-2 m2.5x16 Phillips bolts, mount the servo into the frame as shown in the illustration. There already are
PEM nuts pressed into the frame for this purpose. NOTE: you may have to change the servos spacers in a later step to insure proper
alignment of the control rod.
128-172
oR 128-173
SEE noTATIon In
WRITTEn TExT
SERvo
128-172
ELEvAToR SERvo
128-172
2x
128-170
2x
0039-2
4x
32